|
The Conklin Residence Click on thumbnails below for larger images. |
|
|
|
We designed 10 zones of radiant floor heat for the Conklin residence. We also designed and installed a dual boiler system that heats the outdoor pool as well. |
|
|
|
|
|
|
|
The gypsum underlayment is applied over the radiant tubing to create gentle, uniform warmth. Additionally, it provides excellent sound control between floors. |
|
|
|
The living room illustrates the freedom of furniture placement with radiant floor heat. | |
|
Towel warmers are mounted on either side of the Jacuzzi tub. They provide luxuriously warm towels as well as supplemental heat. | |
 |
The control panel was fabricated in our shop in 2 sections. Each section was pressure tested, wired, and all system functions pre-tested before delivery to the job site. In addition to the 10 heating zones, the system also heats the towel warmers, domestic hot water, the outdoor pool, and it is set up to heat a hot tub in the future. All control functions are fully integrated for optimum system efficiency. |
|
|
The boiler system consists of 2 Weil McLain oil-fired boilers. The boilers are staged, rotated and reset to provide greater efficiency and reliability. The combustion air is drawn directly from the outside to the burners, eliminating the need to use warm air from the building for combustion. |
|
|
Back to Residential Projects page
Advanced
Radiant Design, Inc. |
